Home > Catalog > Touch-N-Seal™ Foams > P2 Gun

P2 Gun

To purchase please contact your local RV Dealer.

Touch-N-Seal spray foam systems offer several accessories to assist with quality foam application. These include the P2 spray gun, one of the most advanced plural component spray guns available.

Available as:

• P2 gun with 10 ft. hose accessory pack.

• P2 gun with 30 ft. hose accessory pack.

• P2 gun with 10 ft. hose only.


Print

The P2 spray gun is the smallest and lightest gun available for dual component polyurethane spray. Working with fast set-up materials, your spray gun needs to work with 100 percent efficiency 100 percent of the time. You don’t want gun problems while the spray is curing in 30 to 60 seconds. With other spray guns, chambers can stick during operation and cleaning can be time consuming. These guns can be very high maintenance and very expensive. With the P2, the chamber insert can be replaced without replacing the entire chamber, the most expensive business part of the gun. The P2 is made to stand up to day-in and day-out use with great reliability, ease of use and simple maintenance. Its consistent spray and efficient operation assures a quality application and more uptime.

Other Features and Benefits of the P2 gun.

Features Benefits

Completely new 2-piece mixing chamber design for fast set foam, allowing better control over the surface finish and dimensions of the material control passage.

Less cleaning. Up to five times longer operation time.

Better material flow path and spray pattern.

Low-cost maintenance — chamber insert can be replaced without replacing the entire chamber, the most expensive business part of the gun.
High velocity double piston design that gives more trigger force from a smaller piston diameter.

Smallest and lightest production volume gun in the in the industry.

Over 300 lbs. of triggering force.

No sticking chamber.

Less maintenance.
Piston isolation design virtually eliminates the possibility of material entering the air chamber of the gun.

Consistent trigger operation and air purge.

Lower maintenance costs.

Less downtime.
More trigger force than other guns. Quicker and more complete spray pattern.
Anti-crossover, four-bolt design. Keeps possibility of reacted material in the gun to a minimum.
Ergonomic handle More comfortable spraying and less hand fatigue.

 

Part NumberDescriptionPriceUnitQuantity

Seal Design and Dicor Corporation focus on the people and companies that use our products. This includes products, support and services that help improve the production process.

  • Reduced maintenance time and cost.
  • Much easier to shut down and flush.
  • Easy and less fatiguing to use.
  • Less down time due to sticking and clogging.

The P2 gun’s rugged design, high reliability, ease of use, simple maintenance and quality performance make it a favorite on the plant floor.

With other spray guns, chambers can stick during operation and cleaning can take time. These guns can be very high maintenance and very expensive. With the P2, the chamber insert can be replaced without replacing the entire chamber, the most expensive business part of the gun.

Product Case Pack Case WT (lbs.)
P2 Gun/10ft Hose 1 3